«

»

Apr 03 2012

JD Edwards 9.1 Standalone (DEMO) Installation Tutorial

VN:F [1.9.22_1171]
Rating: 4.8/5 (29 votes cast)

Install JD Edwards EnterpriseOne™ 9.1 Standalone Demo (Oracle version) on your PC, with this step by step guide.

Very Important:

a. This version (according to the Oracle Docs) is designed to run on Windows 7 x64. Even you install successfully in another version of Windows 64, some business functions don’t work as expected, so, stay with Windows 7 64 and everything should work as expected.

b. Before you start with anything, turn OFF your Anti-virus, Firewall and Disable UAC (User Access Control). For security purposes you could enable again the Firewall and Anti-virus AFTER the installation was completed.

c. If you plan to install in a Virtual Machine, make sure that VM has between 2 and 4 GB of RAM. Some users reported that more than 8 GB causes the Oracle Client Install to get stuck on pre-requirements step. Thanks Matthew for the info.

This procedure was a result from information that I gathered from Oracle Docs, tips from another users and "trial and error" tests. Suggestions and comments are always welcome.

Let’s start!

We need the Oracle 11G R2 32 bit Windows Client. The JDE Stand Alone Client is still a 32 bit executable, and the installer package provided by Oracle simple refuses to go on without this piece of software. Use the following screens to select the correct files:

Oracle Client Media Selection

Oracle Database Client

3. Unzip the V20606-01.zip file and run the Oracle Client Setup program:

Oracle Client Setup

4. Make sure to select Administrator option in the options list and click Next:

fig6

Note: In the previous version of this guide, we used the option Runtime, but this client install option maybe not installing all required .dll files that is necessary to run SQL queries in E1Local database instance, sometimes occurring an error similar to this, no matter the SQL tool you are using:

fig7

I fixed this problem changing the type of Oracle Client install to Administrator. Let’s use this option from now on.

5. In the next screen, leave English as selected language and click Next.

6. Leave the default options in the "Specify Installation Location" and click Next and them Finish. The installation should start. It’s time to take a cup of coffee, check the weather, etc. 🙂

If, for any reason that you haven’t turned OFF the Windows Firewall, you maybe see a screen like this:

Windows Firewall Alert

7. Ensure to check "Private networks, such as my home or work network" and click Allow access. This kind of alert will appears again later, until you turn OFF the Windows Firewall during the install process. (This alert will appears again when you Turn ON the Windows Firewall after the install process. Just use the same answer here).

8. When the installation is finished, click the Close button and then reboot the computer.

9. Now, it’s time to install JDE Client itself. The install process is divided in two parts: the first install the Oracle Database, and the second the JDE Client. The four files that we downloaded earlier must be combined to make a working setup installation: extract the four files and you will have a folder structure like this:

Folder Structure

10. Move the contents from folder V30798-01 to folder V30799-01. (Just select all files in the first folder, press Ctrl-X, select the second folder and press Ctrl-V. The famous Cut and Paste). The resultant folder will look like this:

Install Folder

11. Now, we must move the contents from folders V30807-01 and V30808-01 into the folder V30799-01\ThirdParty\ORACLE. The resultant folder will look like this:

Second Part Install Folder

12. If you prefer, you can rename the install folder to any name more easier to remember, for example: JDE_DEMO_V91:

New Folder Name

13. Now, it’s time to start the first part of Stand Alone Demo Install. Double-click the InstallManager.exe, and them click EnterpriseOne Database Engine:

Database Engine Install

The install program will decompress the cab files:

Decompressing Files

It’s time to another cup of coffee!

Remember the question about the Windows Firewall? Yes, maybe you see that Window Alert again. Select the same options like before (ensure to check "Private networks, such as my home or work network" and click Allow access).

14. If everything goes fine, it’s time to reboot again. Click Yes to continue:

Install Successful

15. Now, it’s time to start the second part of Stand Alone Demo Install. Double-click the InstallManager.exe, and them click EnterpriseOne E910 Standalone Client:

Second Part of Demo Install

16. In the Welcome Screen, click Next:

Install Welcome Screen

17. In the "Oracle License Agreement Screen" click in "I accept the License Terms and Export Restrictions" to continue.

Installer License Agreement

18. Change the following parameters and them click Next:

Home Details

19. Again, click Next:

Package Selection

20. Select Development and click Next:

Environment Selection

21. We almost done! Finally, click in Install:

Final Step

The install process will begin. It’s time to another huge cup of coffee!

22. If everything goes fine, you will see the "End of Installation Screen":

End of Installation

23. Click in the Exit button.Then,in the Yes button. You can close the InstallManager window too, but, don’t reboot the computer yet.

24. Copy the file tnsnames.ora from C:\Oracle\E1Local\NETWORK\ADMIN to C:\app\Admin\product\11.2.0\client_1\network\admin (since this file was not there/no need to setup the listener, just copy).

25. Now, reboot the machine.

26. Lets test the new installation! If everything goes fine till now, we will be presented with the Demo Login Screen:

JDE DEMO 9.1 Logon Screen

And, the Solution Explorer Window:

JDE DEMO 9.1 Solution Explorer

The NEW web interface:

JDE DEMO 9.1 Web Interface

27. Now you can turn ON again your Firewall and Anti-virus (don’t forget to properly answer the questions about permissions explained earlier).

Note:

If you try to run a report via WEB interface and receive the error: “Local submission is not supported from skinny batch versions/menus” it’s mean that report must be called from fat client instead from WEB. Open Solution Explorer, call BV and run it. Thanks Russ for the feedback.

That’s it.

Please do let know your comments!

NB: Oracle E1Local Database Credentials (Case sensitive)
User: JDEDATA910
Pwd: JDEData910

Published under the license.

VN:F [1.9.22_1171]
Rating: 4.8/5 (29 votes cast)
JD Edwards 9.1 Standalone (DEMO) Installation Tutorial, 4.8 out of 5 based on 29 ratings
(Visited 9,032 times, 8 visits today)

About the author

Marcelo Santos

Over 27 years of experience in IT area, working as Oracle JD Edwards Developer with expertise in Windows Server, SQL Server and Microsoft Exchange Server, experience in Linux operating systems (Debian and Redhat), VMWare ESX / ESXi, Novell Netware, relational databases like Oracle 10/11g and backup solutions from Computer Associates. Large experience in high-end servers from Dell and HP, having the following certifications: Microsoft: MCP, MCSE, MCDBA, MCSA and MCT (2008 ~ 2013), Computer Associates: Technical Specialist – Storage and Backup Solutions, Novell: Netware 6 SMB Specialist, Compaq/HP: ASE.

264 comments

6 pings

Skip to comment form

  1. JB

    Thx for the guide Marcelo. Will give it a shot today.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  2. vpl

    I don’t think that you need to install runtime version of win32 oracle client. There only one reason to install it is x86 DLLs that using by JDE which is still x86. So Instant Client version works fine.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  3. Sergii Kurian

    Does anybody know demo data user/password ?
    JDEDATA910 didn’t work for me

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Sergei, I published an article that explain how to access the Local Oracle Database. Take a look and let we know if this help you.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  4. Marcelo Santos

    Sergei,

    To access the Oracle database with PL/SQL you must change the password. I will publish a guide soon to explain that.

    VN:F [1.9.22_1171]
    Rating: +2 (from 2 votes)
  5. Marcelo Santos

    VPL,

    I will run a test with this option, and later I publish the correction, if it’s work as expected.

    Marcelo.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  6. Marcelo Santos

    VPL,

    I tested the option that you told, and selecting only the Instant Client the JDE DEMO installation fails. Is there any other option that we must use?

    The error that install program gives is: “The command failed with error 1”

    Looking in the “dos box” behind the error popup we could see the Database Install Engine procedure was failed.

    But, if I install the Oracle Client with the option Runtime, the install continues with no problem.

    Marcelo.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  7. Zeeshan Ghani

    Hi Marcelo,

    Your guide is of immense help and I was able to successfully install the JDE on a 64 bit machine.

    However, today I tried to install JDE on a 32 bit Windows. I was successful till Step 14 and in the Step 15 when I tried installing the Oracle Database, I get the error which says “you are trying to install a 64 bit database on a 32 bit Windows”. What should I do in this circumstance ?

    Regards,

    Zee

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Thank you Zeeshan, I’m glad that the guide helped you. Well, according to the Oracle Docs that I read, the Oracle Database that came with the DEMO 9.1 Install package is a 64-bit version and will not run in 32-bit versions of Windows. The JDE client however is a 32-bit software, and because that we need the 32-bit Oracle Client software. In this case, I guess there is no much to do, except if Oracle launches a DEMO 9.1 designed to run in Windows 32 bit versions.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  8. Poonam

    Hi Marcelo/Deepesh,

    Has anyone used sample OATS scripts (Oracle application testing suite) on 9.1 Demo ?Any idea where can i find the sample scripts?

    Regards,
    Poonam

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  9. Marcelo Santos

    The place that you can download these scripts are here:

    http://www.oracle.com/technetwork/oem/downloads/index-084446.html

    But, I never heard about using this in demo version, sorry.

    Marcelo.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  10. Zeeshan Ghani

    Hi Marcelo,

    Recently on 4th April, Oracle released the JDE E1 9.1 Applications(Part no – B66755-02). I downloaded the standalone for this (Part No’s – V31550,V31553,V31551,V31552) and installed it on a virtual box using your installation guide stated above. The installaiton for both the database and the JDE client was successful. However when I try to login from the Demo Login screen, after a while it says “Unable to Locate Security server” and i can’t login. I tried shutting the PC down but the result is the same. What should I do in this circumstance ?

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Zeeshan,

      Please check the IP connectivity in the virtual machine. The proper network config for the VM (virtual machine) must be NAT (if you constantly changes from one place to another) or bridged, used when you have a constant and single place and the same IP address. Algo, check if you don’t forgot to copy the tsnames (step 26).

      VN:F [1.9.22_1171]
      Rating: +1 (from 1 vote)
  11. Ashutosh

    “Unable to Locate Security server” message would appear when you do not have “32bit Oracle client” installed on workstation or TNSNAME.ORA file is not having E1Local connection information.

    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  12. Matthew

    Hi Marcelo, I followed all the steps and reqs, but when I launch the oracle client install it gets stuck on the prerequirements step. The bar gooes to 100% and it freezes up…Any thoughts? Thanks!

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Please check these two things: free space in C: drive, and if you can, open a cmd prompt and run the command systeminfo > specs.txt. Open the specs.txt file and put the information here, maybe we can help you to figure out what is going on.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  13. Brian Gilbert

    I have downloaded and am using the standalone demo.

    However, I cannot run any reports such as R42520 – Pick Slip Print. Is there something I am missing? Is there a workaround for this?

    Regards,

    Brian Gilbert

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Did you saw in the log file for any clue? It is the first thing that I would take a look. Now I don’t have access to my VM, but, when I in the office I will try to replicate this behavior.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. Brian Gilbert

        Thank you. Please let me know how your replication test goes.

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
        1. Marcelo Santos

          Brian, I ran this report with no issues, using the version “Print Pick Slips – Batch (XJDE0001)”. The report with no data selection took about 4 minutes to finish in Win7 and about 3 mins in Version 9/XP. In the version 9.10 the report throws 762 pages and in XP 720 pages.

          VN:F [1.9.22_1171]
          Rating: 0 (from 0 votes)
          1. Brian Gilbert

            Hi Marcelo:

            Thank you fo rthe reply.

            I tried running R42520 with data selection for 1 new SO I had created aand got this error message: “Local submission is not supported from skinny batch versions/menus.”

            Does this shed more light for you on my printing issue? I am running the demo on a Dell with Windows 7, 64 bit.

            Regards,

            Brian

            VA:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
          2. Marcelo Santos

            Are you using the same version that mine? Just for testing purposes, try to run the report with no data selection. Let we know what happens.

            VN:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
          3. Brian Gilbert

            Hi Marcelo:

            I am not running the same demo version as outlined in your guidelines above. It seems to be a newer version, although I followed the guidelines for the install precisely.

            I tried running the same R42520 version you ran and I get the sam error as I posted above.

            Regards,

            Brian

            VA:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
          4. Marcelo Santos

            Brian, I’m confused now: The tests that I’ve done is in the version 9, running XP and in the version 9.10 running in Windows 7/64. The *report* version is Print Pick Slips – Batch (XJDE0001). Are we talking about the same JDE DEMO versions and the same REPORT version?

            If not, we need to know the correct DEMO/Report version you are using and maybe I don’t know how to help you, because the test environment would be completely different from mine.

            VN:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
          5. Brian Gilbert

            Sorry if I confused you.

            When I followed your steps above, the files I downloaded by following your precise instructions had more recent dates and some of the 4 files to download were larger than the ones in your screen prints. This is what I meant when I wrote that my standalone demo version of JDE E1 9.1 is “newer” than yours and when you had prepared the install documentation above.

            Have I properly clarified things for you?

            Regards,

            Brian

            VA:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
      2. Marcelo Santos

        Alright Brian! Now the things are clear! Well, I really don’t know what’s going on with this version. When I have free time I will try to download and install this version, and I will post here any new information. Stay tuned!

        VN:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
        1. Russ

          I think I know this one! When you are running Standalone, you cannot submit Batch Versions from the Web (using the standard web “BV” app, P98305W). It gives you the “skinny batch versions” error message. I think this “feature” has been out there since E812. All you have to do is open up BV from the fat-client, and run your version from there. Hope this helps!

          VA:F [1.9.22_1171]
          Rating: 0 (from 0 votes)
          1. Marcelo Santos

            Russ, thank you, you’re right. When I ran the tests, I did only in the fat client, and now I noticed that Brian maybe is trying to run these reports via web interface.

            The message error really appears when I try to run this report via web version. Brian, can you confirm this?

            Marcelo.

            VN:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
          2. Brian Gilbert

            Thank you Russ.

            You were right. I was trying to run the R42520 from the web interface. When I tried running it from the fat client, using BV, etc., it worked.

            So, I can confirm what you posted above Marcelo. Thank you. May I suggest you add note to your demo install instructions below as a notice, etc.

            Have a great day.

            Brian

            VA:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
        2. Marcelo Santos

          Yes, I will add a notice in the end of tutorial, with the Russ credits. Again, thank you all for the help.

          VN:F [1.9.22_1171]
          Rating: 0 (from 0 votes)
  14. Matthew

    Thanks a lot Marcelo,maybe memory,not sure

    There you go for the specs:

    Host Name: ORACLE-PC
    OS Name: Microsoft Windows 7 Professional
    OS Version: 6.1.7600 N/A Build 7600
    OS Manufacturer: Microsoft Corporation
    OS Configuration: Standalone Workstation
    OS Build Type: Multiprocessor Free
    Registered Owner: Oracle
    Registered Organization:
    Product ID: 00371-OEM-8992671-00524
    Original Install Date: 8/25/2010, 10:35:44 AM
    System Boot Time: 4/20/2012, 8:07:20 AM
    System Manufacturer: Dell Inc.
    System Model: Precision M6500
    System Type: x64-based PC
    Processor(s): 1 Processor(s) Installed.
    [01]: Intel64 Family 6 Model 30 Stepping 5 GenuineIntel ~2000 Mhz
    BIOS Version: Dell Inc. A00, 10/6/2009
    Windows Directory: C:\Windows
    System Directory: C:\Windows\system32
    Boot Device: \Device\HarddiskVolume1
    System Locale: en-us;English (United States)
    Input Locale: en-us;English (United States)
    Time Zone: (UTC-05:00) Eastern Time (US & Canada)
    Total Physical Memory: 16,308 MB
    Available Physical Memory: 13,575 MB
    Virtual Memory: Max Size: 32,615 MB
    Virtual Memory: Available: 29,666 MB
    Virtual Memory: In Use: 2,949 MB
    Page File Location(s): C:\pagefile.sys
    Domain: WORKGROUP
    Logon Server: \\ORACLE-PC
    Hotfix(s): 166 Hotfix(s) Installed.
    [01]: 982861
    [02]: KB971033
    [03]: KB2032276
    [04]: KB2079403
    [05]: KB2158563
    [06]: KB2160329
    [07]: KB2183461
    [08]: KB2207566
    [09]: KB2249857
    [10]: KB2272691
    [11]: KB2281679
    [12]: KB2284742
    [13]: KB2286198
    [14]: KB2296011
    [15]: KB2296199
    [16]: KB2305420
    [17]: KB2345886
    [18]: KB2347290
    [19]: KB2360131
    [20]: KB2378111
    [21]: KB2385678
    [22]: KB2387149
    [23]: KB2387530
    [24]: KB2388210
    [25]: KB2393802
    [26]: KB2398632
    [27]: KB2416400
    [28]: KB2416471
    [29]: KB2419640
    [30]: KB2423089
    [31]: KB2425227
    [32]: KB2436673
    [33]: KB2442962
    [34]: KB2443685
    [35]: KB2446709
    [36]: KB2454826
    [37]: KB2467023
    [38]: KB2467659
    [39]: KB2475792
    [40]: KB2476490
    [41]: KB2478661
    [42]: KB2479628
    [43]: KB2479943
    [44]: KB2482017
    [45]: KB2483614
    [46]: KB2484033
    [47]: KB2485376
    [48]: KB2487426
    [49]: KB2488113
    [50]: KB2491683
    [51]: KB2492386
    [52]: KB2503665
    [53]: KB2505438
    [54]: KB2506014
    [55]: KB2506212
    [56]: KB2506928
    [57]: KB2507618
    [58]: KB2508272
    [59]: KB2509553
    [60]: KB2510531
    [61]: KB2511250
    [62]: KB2511455
    [63]: KB2515325
    [64]: KB2518867
    [65]: KB2522422
    [66]: KB2524375
    [67]: KB2525694
    [68]: KB2529073
    [69]: KB2530548
    [70]: KB2532531
    [71]: KB2533552
    [72]: KB2534366
    [73]: KB2535512
    [74]: KB2536275
    [75]: KB2536276
    [76]: KB2539634
    [77]: KB2541014
    [78]: KB2544893
    [79]: KB2545698
    [80]: KB2547666
    [81]: KB2552343
    [82]: KB2556532
    [83]: KB2560656
    [84]: KB2562937
    [85]: KB2563227
    [86]: KB2563894
    [87]: KB2564958
    [88]: KB2567053
    [89]: KB2567680
    [90]: KB2570791
    [91]: KB2570947
    [92]: KB2572076
    [93]: KB2579686
    [94]: KB2584146
    [95]: KB2585542
    [96]: KB2586448
    [97]: KB2588516
    [98]: KB2603229
    [99]: KB2616676
    [100]: KB2617657
    [101]: KB2618451
    [102]: KB2619339
    [103]: KB2620704
    [104]: KB2620712
    [105]: KB2621440
    [106]: KB2631813
    [107]: KB2633879
    [108]: KB2633952
    [109]: KB2639308
    [110]: KB2640148
    [111]: KB2641653
    [112]: KB2641690
    [113]: KB2644615
    [114]: KB2645640
    [115]: KB2647516
    [116]: KB2647518
    [117]: KB2653956
    [118]: KB2654428
    [119]: KB2656355
    [120]: KB2656372
    [121]: KB2660075
    [122]: KB2665364
    [123]: KB2667402
    [124]: KB2675157
    [125]: KB2679255
    [126]: KB958488
    [127]: KB972270
    [128]: KB973751
    [129]: KB974332
    [130]: KB974431
    [131]: KB974571
    [132]: KB975467
    [133]: KB975496
    [134]: KB975560
    [135]: KB976902
    [136]: KB977074
    [137]: KB978542
    [138]: KB978601
    [139]: KB978637
    [140]: KB978886
    [141]: KB979099
    [142]: KB979309
    [143]: KB979482
    [144]: KB979538
    [145]: KB979687
    [146]: KB979688
    [147]: KB979900
    [148]: KB979916
    [149]: KB980195
    [150]: KB980218
    [151]: KB980232
    [152]: KB980408
    [153]: KB980436
    [154]: KB980846
    [155]: KB981078
    [156]: KB981332
    [157]: KB981793
    [158]: KB981852
    [159]: KB981957
    [160]: KB982018
    [161]: KB982110
    [162]: KB982132
    [163]: KB982214
    [164]: KB982665
    [165]: KB982799
    [166]: KB983590
    Network Card(s): 5 NIC(s) Installed.
    [01]: Broadcom NetXtreme Gigabit Ethernet
    Connection Name: Local Area Connection
    Status: Media disconnected
    [02]: Dell Wireless 1510 Wireless-N WLAN Mini-Card
    Connection Name: Wireless Network Connection
    DHCP Enabled: Yes
    DHCP Server: 192.168.2.1
    IP address(es)
    [01]: 192.168.2.11
    [02]: fe80::415e:eada:a7d2:7a0c
    [03]: VMware Virtual Ethernet Adapter for VMnet1
    Connection Name: VMware Network Adapter VMnet1
    DHCP Enabled: No
    IP address(es)
    [01]: 169.254.75.1
    [02]: fe80::554b:1d3a:da1c:4b01
    [04]: VMware Virtual Ethernet Adapter for VMnet8
    Connection Name: VMware Network Adapter VMnet8
    DHCP Enabled: No
    IP address(es)
    [01]: 192.168.164.1
    [02]: fe80::a0d9:654:a476:3f51
    [05]: Microsoft Virtual WiFi Miniport Adapter
    Connection Name: Wireless Network Connection 2
    Status: Media disconnected

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Matthew,

      I’ve done the same install again from beginning to the end with no problems at all. The only difference I noted in both configs are about memory: my VM is configured with 2GB of memory in my notebook and 4GB in my desktop. I don’t know if this could be influence in install process, but, is the only difference that I noticed. Can you try the install process with these new mem config?

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  15. Russ

    Thanks Marcelo! I have managed to install it now, using your instructions (i.e. installing the 32-bit DB first, and turning AV and Firewall off).
    I transferred some code from another machine, using the save and restore .par files, but am experiencing problems checking-in BSFN’s and TBLE’s (i.e. those objects which have a .h file). Have you experienced this problem before?
    Thanks,
    Russ

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      This happens to me too, either in version 9 or 9.10. First I thought that are a problem in version 9 install but I received the same error in 9.10 when try to check-in/out a table or Business Function. I guess this could be a “default” behavior in both DEMO versions. If anyone knows how to fix it, please let Us know.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
    2. Marcelo Santos

      And, with another test: If you create a custom table, you can make a check-in, but, the OMW shot an error and quit. The table cannot ckeck-out again. You can do a check-out of an std table, but the next check-ins fails. The same kind of error occur in version 9 (Windows XP).

      EDIT: Maybe this feature is not fully implemented in DEMO version. I will check in Oracle Docs regarding this error.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. Russ

        Thanks for your help Marcelo. We had some issues on our 9.1 server based install, where there were permissions issues to folders, so I might get the local admin password for my laptop, and see if that helps. I also have a sneaky suspicion that Path Codes, OCM’s, and DBDS’s may come into play, too, but I’ll work on the permissions angle next week when I get back from Collaborate.

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
        1. Marcelo Santos

          Thanks Russ. In my previous tests, UAC was the villain. In some way, turning off solved the problems about the folder permissions, and in XP this kind of problem never happened before, I guess because the less restricted out-of-box security.

          As I don’t have a deep CNC knowledge, I need to read the Oracle Docs, search the web and share the tips and tricks gathered from other sources and put everything that I discover in a more ‘didactic’ way in order to help others.

          This is a community effort, where everybody can learn and teach.

          Marcelo.

          VN:F [1.9.22_1171]
          Rating: 0 (from 0 votes)
  16. Matthew

    Yeah, that’s correct, I’ve created a Windows 7 VM with the memory allocated and it worked handsomely. Thanks!

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  17. Sahai

    Hi All

    Thx for sharing information and experience, it is great help in installing E91 and it works for me. I am planning to Install following on my laptop 1.Oracle Database server 2.E9.1 Standalone, 3. OBIEE. Till now i able install Oracle database without any challenges, But when i am trying to install E9.1 it fails with the errors (please see the error log details below the email).

    My assumption was when i am installing E9.1 it is going to install schema on existing oracle database server. But looks like it not recognizing the existing Oracle data base server and trying to install Oracle server. Do you know the steps how to install E1 local schema only to use the existing Oracle server. Any help would be appreciated.

    OEEInstall.log
    ————–
    22 1 10:03:10 I Cab_Decompression: The compressed file to extract is C:\Users\Documents\JDE\E91\Standalone_9.10\ThirdParty\ORACLE\E1Local15.CAB.
    23 1 10:03:19 I Installing Oracle.
    24 1 10:03:19 I Installing Oracle Database Engine….
    25 1 10:03:19 I Installing Oracle Database Engine with command: c:\Oracle\E1Local\oui\bin\setup.exe -silent -nowait -clone -nobackground -waitforcompletion -force ORACLE_BASE=c:\Oracle ORACLE_HOME=c:\Oracle\E1Local ORACLE_HOME_NAME=E1Local
    26 1 10:05:19 I Uninstalling Oracle Net Listener….
    27 1 10:05:19 I Uninstalling Oracle Net Listener with command: c:\Oracle\E1Local\bin\netca.bat /deinst
    28 1 10:05:26 I Installing Oracle Net Listener….
    29 1 10:05:26 I Installing Oracle Net Listener with command: c:\Oracle\E1Local\bin\netca.bat /silent /responsefile C:\Users\AppData\Local\Temp\netca.rsp
    30 1 10:05:33 E : The command failed with error 1.

    netca_E1Local-12042610AM0526.log
    ——————————–
    Thu Apr 26 10:05:27 CDT 2012 Oracle Net Configuration Assistant
    Parsing command line arguments:
    Parameter “silent” = true
    Parameter “responsefile” = C:\Users\AppData\Local\Temp\netca.rsp
    Parameter “log” = C:\Users\AppData\Local\Temp\Netca.log
    Done parsing command line arguments.
    Oracle Net Services Configuration:
    LISTENER:Port 1521 provided for this listener is currently in use.
    Default local naming configuration complete.
    Created net service name: E1Local
    Profile configuration complete.
    Check the trace file for details: c:\Oracle\cfgtoollogs\netca\trace_E1Local-12042610AM0526.log
    Oracle Net Services configuration failed. The exit code is 1

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  18. Lucku

    Hi All,

    I tried to install the EnterpriseOne Database Engine failed, I am getting “The command failed with error -1”.
    I am using WIN7 64 bit. I already installed oracle Database Client 11g (11.2.0.10).

    Below is the log

    EnterpriseOne Local Oracle Database:
    Summary
    ——————————————————————————————————————————————————
    OS Version Unknown Service Pack 1 (VER_PLATFORM_WIN32_NT 6.1)
    Installer Version 1.0.0.1
    Launch String C:\Standalone 9.1\ThirdParty\ORACLE\OEESetup.exe
    Launch Time Friday, April 26, 2012 12:56 PM
    ——————————————————————————————————————————————————~~~
    Line# Msg# Time Level Message
    ——————————————————————————————————————————————————
    1 1 12:56:53 I Setting current directory: C:\Standalone 9.1\ThirdParty\ORACLE\
    2 1 12:56:53 I Cab_Decompression: Extract one file from cab.

    3 1 12:56:53 I Cab_Decompression: Destination directory for file is C:\Users\Lucky\AppData\Local\Temp\.

    4 1 12:56:54 I
    Could not find registry key \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_E1Local. The 64 bit Oracle database E1Local is not installed.
    5 1 12:56:54 I
    Oracle is not installed – will install it.

    6 1 12:57:38 I Cab_Decompression: Starting decompression of the cab files.

    7 1 12:57:38 I Cab_Decompression: Destination directory for extracting cab file is c:\Oracle\E1Local\.

    8 1 12:57:38 I Cab_Decompression: Open cabinet file C:\Standalone 9.1\ThirdParty\ORACLE\E1Local.cab.

    9 1 12:57:38 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local.cab.

    10 1 12:58:33 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local3.CAB.

    11 1 12:58:43 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local5.CAB.

    12 1 12:58:53 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local6.CAB.

    13 1 12:59:15 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local7.CAB.

    14 1 12:59:33 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local8.CAB.

    15 1 01:01:12 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local9.CAB.

    16 1 01:01:49 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local10.CAB.

    17 1 01:04:03 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local11.CAB.

    18 1 01:04:43 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local12.CAB.

    19 1 01:04:58 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local13.CAB.

    20 1 01:05:29 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local14.CAB.

    21 1 01:06:42 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local15.CAB.

    22 1 01:06:58 I Installing Oracle.
    23 1 01:06:58 I Installing Oracle Database Engine….
    24 1 01:06:58 I Installing Oracle Database Engine with command: c:\Oracle\E1Local\oui\bin\setup.exe -silent -nowait -clone -nobackground -waitforcompletion -force ORACLE_BASE=c:\Oracle ORACLE_HOME=c:\Oracle\E1Local ORACLE_HOME_NAME=E1Local
    25 1 01:07:24 E : The command failed with error -1.
    Install Time: 00 hours, 11 mins, 16 secs.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Hi Lucku, this was happened with me in the past when I installed the wrong Oracle Client version. The client must be the Oracle Database 11G R2 32-bit, and pay attention to which option you are selecting in the client install process.

      Let we know if that will help you.

      Marcelo.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  19. Lucku

    Hi Marcelo,

    I followed instructions on this page,the oracle client version I installed is 11GR2 32 bit mentioned here (Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (32-bit)).
    However I saw that the part numbers of the 4 files for JD Edwards changed a bit,there are not like the ones mentioned in this page ,but I assume that I have to follow the same instructions..
    I tried and tried again but didn’t succeed.I got the same error..I am not sure the problem is happening and how to solve it..

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  20. Lucku

    Marcelo,

    I de-installed Oracle database and removed all oracle related folders and in registry and then did a clean install again.THis time I am able to go further a little bit but again another error related to tnsnames.ora is showing..
    Below is the log, anything that is missing on the steps, I saw that the tnsnames.ora have to be updated at the step 25.

    EnterpriseOne Local Oracle Database:
    Summary
    ——————————————————————————————————————————————————
    OS Version Win2000 Service Pack 2 (VER_PLATFORM_WIN32_NT 5.1)
    Installer Version 1.0.0.1
    Launch String C:\Standalone 9.1\ThirdParty\ORACLE\OEESetup.exe
    Launch Time Monday, April 30, 2012 01:36 AM
    ——————————————————————————————————————————————————~~~
    Line# Msg# Time Level Message
    ——————————————————————————————————————————————————
    1 1 01:36:09 I Setting current directory: C:\Standalone 9.1\ThirdParty\ORACLE\
    2 1 01:36:09 I Cab_Decompression: Extract one file from cab.

    3 1 01:36:09 I Cab_Decompression: Destination directory for file is C:\Users\usaexm14\AppData\Local\Temp\.

    4 1 01:36:11 I
    Could not find registry key \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_E1Local. The 64 bit Oracle database E1Local is not installed.
    5 1 01:36:11 I
    Oracle is not installed – will install it.

    6 1 01:36:11 I Cab_Decompression: Starting decompression of the cab files.

    7 1 01:36:11 I Cab_Decompression: Destination directory for extracting cab file is c:\Oracle\E1Local\.

    8 1 01:36:11 I Cab_Decompression: Open cabinet file C:\Standalone 9.1\ThirdParty\ORACLE\E1Local.cab.

    9 1 01:36:11 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local.cab.

    10 1 01:37:16 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local3.CAB.

    11 1 01:37:28 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local5.CAB.

    12 1 01:37:38 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local6.CAB.

    13 1 01:38:02 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local7.CAB.

    14 1 01:38:29 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local8.CAB.

    15 1 01:40:28 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local9.CAB.

    16 1 01:41:12 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local10.CAB.

    17 1 01:43:58 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local11.CAB.

    18 1 01:44:44 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local12.CAB.

    19 1 01:45:03 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local13.CAB.

    20 1 01:45:39 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local14.CAB.

    21 1 01:47:06 I Cab_Decompression: The compressed file to extract is C:\Standalone 9.1\ThirdParty\ORACLE\E1Local15.CAB.

    22 1 01:47:22 I Installing Oracle.
    23 1 01:47:22 I Installing Oracle Database Engine….
    24 1 01:47:22 I Installing Oracle Database Engine with command: c:\Oracle\E1Local\oui\bin\setup.exe -silent -nowait -clone -nobackground -waitforcompletion -force ORACLE_BASE=c:\Oracle ORACLE_HOME=c:\Oracle\E1Local ORACLE_HOME_NAME=E1Local
    25 1 01:55:39 I Uninstalling Oracle Net Listener….
    26 1 01:55:39 I Uninstalling Oracle Net Listener with command: c:\Oracle\E1Local\bin\netca.bat /deinst
    27 1 01:55:52 W UninstallNetListener(): Failed to uninstall net listener.
    28 1 01:55:52 I Installing Oracle Net Listener….
    29 1 01:55:52 I Installing Oracle Net Listener with command: c:\Oracle\E1Local\bin\netca.bat /silent /responsefile C:\Users\lucky\AppData\Local\Temp\netca.rsp
    30 1 01:56:07 I Setting up SQLNET Authentication Services.
    31 1 01:56:07 I SQLNET file: c:\Oracle\E1Local\NETWORK\ADMIN\sqlnet.ora
    32 1 01:56:07 I Installing Oracle seed database.
    33 1 01:56:07 I Installing the Oracle seed database with command: c:\Oracle\E1Local\bin\dbca.bat -silent -createdatabase -templatename c:\Oracle\E1Local\assistants\dbca\templates\E1Local.dbc -gdbname E1Local -SID E1Local -sysPassword ****** -systemPassword ******
    34 1 02:00:39 I Installed seed database.
    35 1 02:00:39 I Updating the tnsnames.ora.
    36 1 02:00:39 E : We cannot update the file c:\Oracle\E1Local\NETWORK\ADMIN\tnsnames.ora.
    The system cannot find the file specified.
    .
    You will need to deinstall and then reinstall the database.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Hello Lucku, I’m in a project that the internet link speed is terrible, and I cannot download the new files to make a new install test. When I get home – that is planned to happen in the next week – I will try to download these new files from Oracle, and try to understand what happens.

      In my tests, everything goes fine while making the fine adjustments that I explained in the guide, but, maybe something could be changed since the Oracle change the version of package files.

      Thank you for the feedback, and my apologies for the unexpected delay.

      Marcelo.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  21. Ryan

    I downloaded all the files today and followed your instructions and I am getting the same error as Lucku (The command failed with error -1).

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Russ

      I had this problem until I … uninstalled everything; turned off Anti-Virus; turned off Firewall; turned off User Account Control; rebooted; installed in the sequence above (32-bit DB, 64-bit DB, E1 client) whilst running all the install programs as Administrator. These changes seemed to make the difference for me, and it all installed successfully.
      Russ

      VA:F [1.9.22_1171]
      Rating: +1 (from 1 vote)
      1. Marcelo Santos

        Thanks Russ for the info. For me, it was not necessary to run the programs as Admin, but maybe some Windows installs must have this additional change. I will modify the guide to include this step.

        VN:F [1.9.22_1171]
        Rating: +1 (from 1 vote)
  22. vpl

    Hi Marcelo Santos. You was right with type of Oracle Client x86. I had success with Instant Client but FDA and some others programs fails with jdboci90.dll exceptions. So I’ve reinstall system with Administrator type of Oracle Client x86 install and it works.

    Has someone install 9.1 Standalone system with translations (V31550,V31553,V31551,V31552 archives on e-delivery). I have some bugs in thin client

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  23. Sammy

    Hey Folks,
    Can this E1 9.1 Demo be installed on a Windows Server 2008 Standard? Does it have to be 64 bit? or 32 bit will work?

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  24. vpl

    I’ve fix one bug with “Search and Select” form for UDC in P0005C-W0005SB in JD Edwards EnterpriseOne 9.1 English and Language Standalone. It’s only fires when user has non-domestic language settings.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. manaboo

      hi vpl

      How did you fix it?
      I have same problem in Japanese Lunguage.
      Your advice will be greatly appreciated.

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. vpl

        Hi manaboo
        I don’t have enough time to create full article right now. I’ll provide some instructions:
        1. open Object management workbench (omw in fastpath)
        2. find object P0005C, add it to your default project and check-out it
        3. Design-open form design aid-form “select user define code” (W0005SB)
        4. In menu Edit select Event Rules
        5. In opend window select “Dialog Initialized” add row “FC Language = SL LanguagePreference”
        before “FC User Defined Codes = FI Userdefinedcodes”
        6. select “Post dialog initialized”
        7. add two rows “Set Selection Append Flag(FC Grid, )
        Set Selection(FC Grid, “F0005D”, “LNGP”, , FC Language, )”
        8. save all, close FDA, check-in P0005C

        I’ve fix this bug with “Search and Select” form for UDC in P0005C-W0005SB. I think that it’s not a problem with settings. In a debug mode I noticed that the results of a query from a table F0005D not limited by language parameters. So I added “SetSelection” system function in “Dialog initialized” section of ER and all works fine.

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
        1. manaboo

          Hi vpl

          Thanks for your tips!
          I’ll try it out sometime soon and
          let you know what happens.

          manaboo

          VA:F [1.9.22_1171]
          Rating: 0 (from 0 votes)
          1. manaboo

            H vpl,

            Looks like it works well!
            Thank you for your time for this.

            manaboo

            VA:F [1.9.22_1171]
            Rating: 0 (from 0 votes)
  25. Lucku

    I successfully installed E9.1 Demo but while the installation was going on I noticed the the tnsnames.ora was not in the folder c:\Oracle\E1Local\NETWORK\ADMIN\ , I then copied the tnsnames.ora from C:\Standalone_9.1\Client\tnsnames.ora and it installed successfully. I am now playing with it.. but I noticed that Demo with Oracle database version seems to eat a lot of memory and the CPU..
    I installed Demo 9.0 before with SQL server express..the memory use was pretty acceptable.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Lucku,

      These file will be placed in this folder after the EnterpriseOne Database Engine install process. In my tests, after these step always there a file in that place.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  26. jainnik

    Hi Marcelo,

    After step 17 above, a dos window opens which says “Starting Oracle Universal Installer…”
    “Checking Swap Space: 0 MB available, 500 MB required. Failed <<<

    Continue Y/N ? "

    Why is the Swap space not available? I have a over 120 GB free on the hard drive.
    Please advise, so I do not get such error.

    Thanks
    Nik

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Deepesh M Divakaran

      Hi Jainnik,
      The swap/page file, is usually an area on the hdd used for temporary storage of information. Windows uses the swap file in addition to RAM for performance improvement.

      To check your information (for Windows 7)

    2. Click Start menu, right-click My Computer or Computer, and then select Properties.
      Note: If this doesn’t match what you see, refer to About navigation settings in Windows.
    3. From the Tasks menu, select Advanced system settings.
    4. In the dialog box that opens, click the Advanced tab. Under the “Performance” section, select Settings
    5. In the Performance Options dialog box, select the Advanced tab.
    6. Click Change. The swap file information is listed at the bottom.
    7. VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Joe

    Hi Marcelo,

    Thank you for putting this together.

    I am able to install the database successfully, as far as the logs are showing. And I can log in using SQLPlus. But when I begin the Standalone client install I am running into an issue.

    On the Package Selection screen the installer can’t find the database, and I get an error message saying: “The ORACLE database named E1Local is installed but there appears to be a problem with it.”

    Any help is greatly appreciated, I am quite new to JDEdwards and installing Oracle software.

    Regards,

    Joe

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Ross

      I’m experiencing the same probelm as Joe. The OEE installation is successful but the Standalone Client installation fails. I’m a JDE functional not a technical (CNC) specialist but I was thinking that the issue might be related to the tnsnames.ora file and how it is copied to nultiple directories. Any comments on this or do you think there night be a different or other issue that is the likley cause for the Client install failure?
      Regards,
      Ross

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. Ross

        Sorry – as specified in the E1 9.1 Standalone installation guide (sec 3.4 and 4.3 Note:) here’s the tnsnames.ora file that I appended and copied to the prescribed paths. Please let me kno if this looks correct to you:

        TNSNSAMES.ORA File Contents

        # Please edit this file to add the necessary oracle database
        # E1LOCAL is required (Local Oracle Database)
        # DO NOT DELETE E1LOCAL entry

        E1LOCAL =
        (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
        (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = E1Local)
        )
        )

        EXTPROC_CONNECTION_DATA =
        (DESCRIPTION =
        (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
        )
        (CONNECT_DATA =
        (SID = PLSExtProc)
        (PRESENTATION = RO)
        )
        )
        = [ (DESCRIPTION_LIST = # Optional depending on whether u have
        # one or more descriptions
        # If there is just one description, unnecessary ]
        (DESCRIPTION=
        [ (SDU=2048) ] # Optional, defaults to 2048
        # Can take values between 512 and 32K
        [ (ADDRESS_LIST= # Optional depending on whether u have
        # one or more addresses
        # If there is just one address, unnecessary ]
        (ADDRESS=
        [ (COMMUNITY=) ]
        (PROTOCOL=tcp)
        (HOST=)
        (PORT=)
        )
        [ (ADDRESS=
        (PROTOCOL=ipc)
        (KEY=)
        )
        ]
        [ (ADDRESS=
        [ (COMMUNITY=) ]
        (PROTOCOL=decnet)
        (NODE=)
        (OBJECT=)
        )
        ]
        … # More addresses
        [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
        [ (CONNECT_DATA=
        (SID=)
        [ (GLOBAL_NAME=) ]
        )
        ]
        [ (SOURCE_ROUTE=yes) ]
        )
        (DESCRIPTION=
        [ (SDU=2048) ] # Optional, defaults to 2048
        # Can take values between 512 and 32K
        [ (ADDRESS_LIST= ] # Optional depending on whether u have more
        # than one address or not
        # If there is just one address, unnecessary
        (ADDRESS
        [ (COMMUNITY=) ]
        (PROTOCOL=tcp)
        (HOST=)
        (PORT=)
        )
        [ (ADDRESS=
        (PROTOCOL=ipc)
        (KEY=)
        )
        ]
        … # More addresses
        [ ) ] # Optional depending on whether ADDRESS_LIST
        # is being used
        [ (CONNECT_DATA=
        (SID=)
        [ (GLOBAL_NAME=) ]
        )
        ]
        [ (SOURCE_ROUTE=yes) ]
        )
        [ (CONNECT_DATA=
        (SID=)
        [ (GLOBAL_NAME=) ]
        )
        ]
        … # More descriptions
        [ ) ] # Optional depending on whether DESCRIPTION_LIST is used or not

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
  • Manas

    Hi Marcelo,

    thanks for the guide. It was really helpful.
    I’s able to install 9.1 following your guide.

    But I’m not able to view the “One View” option in any of the One View applications.
    Do I need to enable it separately?

    Thanks,
    Manas

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Matthew

    Hello Marcelo,

    As of my last comment, the standalone was working fine. I wanted to install BI Publisher to be able to have OVR up and running. The BI installation requires though, for you to install a loopback adapter and have a static ip under 10.10.10.10, for example.From that, you have to enter 127.0.0.1 localhost and 10.10.10.10 MACHINENAME to your hosts file.Then the installation goes fine for BI. Trouble is that this change in the hosts file seems to screw up with the JDE standalone which returns messages like ‘unable to locate security server’. What the heck?Have you followed steps to have BIP installed and have OVR functional?Please advise, Best, Matt

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Eduardo

    Hi Marcelo,

    Did you install another language in the Demo?

    Tks,

    Eduardo

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. vpl

      Hi Eduardo,
      If you want to use other languages than domestic you must download JD Edwards 9.1 Standalone with language translation from e-delivery (V31550,V31553,V31551,V31552 archives). This install contains complete set of supported languages.
      Good luck,
      Pavel.

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. Eduardo

        Hi Pavel,

        These new installation files works fine.
        I’m working with other language.

        Tks,

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
        1. vpl

          I’ve found one bug in thin client. When user has other language settings than domestic and user trying to open search and select form for UDC values (magnifier button near field) you’ll see wrong language description. Please try to repeat these steps for application P01012 (for example) and Search type field. If you have the same problem I can share my solution for this bug.

          VA:F [1.9.22_1171]
          Rating: +1 (from 1 vote)
    2. Marcelo Santos

      Hi Eduardo,

      In the version that I used in that time, the only supported language was English. I’ve read that the new package from Oracle support other languages, but I didn’t have time to test it.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Marcelo Santos

    Sorry everyone for delay about answering the messages. As as said previously, I’m in a project ‘far away’ from civilization, and the internet link is terrible. I guess in this weekend I will back to my home, and I will try to answer the questions posted here.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Ash

    Hi,

    At Oracle Universal Installer: Package Selection Screen (Step 21), I am getting an error msg “The Selection is not valid. Please see log…”.
    Following are the error lines in the log file;
    INFO: 05/13/12 22:47:10.110 The following package file(s) cannot be found:
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW.
    INFO: 05/13/12 22:47:10.110 Package validation failed. One or more source files for the selected package DEMO do not exist. The following package file(s) cannot be found:
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW.
    INFO: 05/13/12 22:47:10.110 Validation of package in file C:\Demo_V91\V31550-01\package_inf\DEMO.inf failed!!! Package validation failed. One or more source files for the selected package DEMO do not exist. The following package file(s) cannot be found:
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW
    C:\Demo_V91\V31550-01\OMW.
    INFO:
    Query Exception: ValidatePackage_ValidationException
    Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
    INFO: false
    INFO: The selected package is not valid. Please see log C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-05-13_10-32-26PM.log for more details or select a different package.
    SEVERE: The selected package is not valid. Please see log C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-05-13_10-32-26PM.log for more details or select a different package.

    Please advice…

    Thanks
    Ash

    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
    1. vpl

      Hi Ash
      I think you made a mistake when unzipping archives. You must unzip each archive into C:\Demo_V91\ folder, not in C:\Demo_V91\V31550-01\
      Check the Step 12 and verify that you have the same catalog structure.
      Good luck,
      Pavel

      VA:F [1.9.22_1171]
      Rating: +2 (from 2 votes)
      1. Marcelo Santos

        You’re right. The install folder structure is not correct.

        VN:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
  • Lucky

    Hi All,

    Do you know how to log in to the management console for E9.1. I tried http://localhost:8999/jde/manage and didn’t get to the login page.

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. vpl

      Hi,
      There is no management console in standalone.

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Ross

    Good summary of the install process. Unfortunately, I’m getting an error on trying to install the Standalone Client – indicating the DB did not install properly. The DB seemed to install correctly but when I checked the Trace.log_E1_Local I found the error is as follows:
    [main] [ 2012-05-16 14:26:55.772 EDT ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:55.788 EDT ] [OsUtilsBase.getBaseFromOrabase:611] cmds: c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:55.819 EDT ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
    c:\Oracle
    [main] [ 2012-05-16 14:26:55.819 EDT ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= c:\Oracle
    [main] [ 2012-05-16 14:26:55.819 EDT ] [SilentHost.initialize:172] SilentHost-> initialize: m_tempLogFile = c:\Oracle\cfgtoollogs\dbca\silent.log
    [main] [ 2012-05-16 14:26:55.835 EDT ] [OracleHome.getTZVersionFromReadMe:370] part read from file Current Structure version
    [main] [ 2012-05-16 14:26:55.835 EDT ] [OracleHome.getTZVersionFromReadMe:370] part read from file 3
    [main] [ 2012-05-16 14:26:55.835 EDT ] [OracleHome.getTZVersionFromReadMe:370] part read from file Current Content Version
    [main] [ 2012-05-16 14:26:55.835 EDT ] [OracleHome.getTZVersionFromReadMe:388] ************get tz version from file 11
    [main] [ 2012-05-16 14:26:55.835 EDT ] [InventoryUtil.getOracleBase:147] Getting ORACLE_BASE from inventory.
    [main] [ 2012-05-16 14:26:55.835 EDT ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [main] [ 2012-05-16 14:26:55.835 EDT ] [InventoryUtil.getOracleBase:162] Inventory Home Size = 1
    [main] [ 2012-05-16 14:26:55.835 EDT ] [InventoryUtil.getOracleBase:187] ORACLE_BASE returned from inventory:= c:\Oracle
    [main] [ 2012-05-16 14:26:55.835 EDT ] [Host.displayOracleBaseWarning:1206] oracleBaseFromEnv null
    [main] [ 2012-05-16 14:26:55.835 EDT ] [Host.displayOracleBaseWarning:1212] oracle_base from OUI c:\Oracle oracle_base from envnull
    [main] [ 2012-05-16 14:26:55.835 EDT ] [Host.checkOPS:2522] Inside checkOPS
    [main] [ 2012-05-16 14:26:55.835 EDT ] [Host.checkOPS:2534] Trying to check cluster existence
    [main] [ 2012-05-16 14:26:55.850 EDT ] [Version.isPre:304] version to be checked 11.2.0.1.0 major version to check against10
    [main] [ 2012-05-16 14:26:55.850 EDT ] [Version.isPre:315] isPre.java: Returning FALSE
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OCR.loadLibrary:308]
    Inside constructor of OCR
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OCR.isCluster:939] Calling OCRNative for isCluster()
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OCR.isCluster:943] OCR Result status = true
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OCR.isCluster:955] Bolean result = false
    [main] [ 2012-05-16 14:26:55.850 EDT ] [Host.checkOPS:2540] cluster existence:false
    [main] [ 2012-05-16 14:26:55.850 EDT ] [Host.checkOPS:2581] Cluster installed=false
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1123] Checking Database Option: Oracle Label Security
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1172] Database Option Oracle Label Security is true
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1123] Checking Database Option: Spatial
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1172] Database Option Spatial is true
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1123] Checking Database Option: OLAP
    [main] [ 2012-05-16 14:26:55.850 EDT ] [OracleHome.isDatabaseOptionOn:1172] Database Option OLAP is true
    [main] [ 2012-05-16 14:26:55.866 EDT ] [OracleHome.isDatabaseOptionOn:1123] Checking Database Option: Oracle Database Vault
    [main] [ 2012-05-16 14:26:55.866 EDT ] [OracleHome.isDatabaseOptionOn:1172] Database Option Oracle Database Vault is false
    [main] [ 2012-05-16 14:26:55.866 EDT ] [InitParamHandler.endElement:524] CustomSGA flag: true
    [main] [ 2012-05-16 14:26:55.866 EDT ] [InitParamHandler.endElement:525] Database Type: MULTIPURPOSE
    [main] [ 2012-05-16 14:26:55.866 EDT ] [InitParamHandler.endElement:526] Mem Percentage: 70
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:240] IN threadID:1 group#=1
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:240] IN threadID:1 group#=2
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:249] Current threadID=1
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:256] Current threadID=1 ==> redoGroups[0]=1
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:266] vRedoGroups:[1]
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:296] setAttribute: bExists=false
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:240] IN threadID:1 group#=3
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:249] Current threadID=1
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:256] Current threadID=1 ==> redoGroups[0]=1
    [main] [ 2012-05-16 14:26:55.866 EDT ] [StorageAttributes.setAttribute:256] Current threadID=1 ==> redoGroups[1]=2
    [main] [ 2012-05-16 14:26:55.881 EDT ] [StorageAttributes.setAttribute:266] vRedoGroups:[1, 2]
    [main] [ 2012-05-16 14:26:55.881 EDT ] [StorageAttributes.setAttribute:296] setAttribute: bExists=false
    [main] [ 2012-05-16 14:26:55.881 EDT ] [TemplateManager.parseCloneTemplate:1518] See for any transportable datafiles in TemplateManager…..
    [main] [ 2012-05-16 14:26:55.881 EDT ] [Host.setupOIDCommandlineParameters:8452] setupOIDCommandlineParameters:
    [main] [ 2012-05-16 14:26:55.881 EDT ] [Host.setupOIDCommandlineParameters:8453] m_regWithdirService: false
    [main] [ 2012-05-16 14:26:55.881 EDT ] [Host.setupOIDCommandlineParameters:8454] m_unregWithdirService: false
    [main] [ 2012-05-16 14:26:55.881 EDT ] [Host.setupOIDCommandlineParameters:8455] m_updateDirService: false
    [main] [ 2012-05-16 14:26:55.881 EDT ] [HAUtils.getHASHome:631] Oracle home from system properties: c:\Oracle\E1Local
    [main] [ 2012-05-16 14:26:55.881 EDT ] [HAUtils.getCRSHome:588] Getting configured CRS/HAS home for Oracle home ( c:\Oracle\E1Local ) …
    [main] [ 2012-05-16 14:26:55.881 EDT ] [GETCRSHOMEUtil.:88] Toolname: getcrshome.exe — Tool location: c:\Oracle\E1Local\binTool dependencies: [Ljava.lang.String;@388ee016
    [main] [ 2012-05-16 14:26:55.881 EDT ] [CmdToolUtil.doexecute:360] starting remote exec server on local node src=c:\Oracle\E1Local\bin dest=C:\Users\ROSSCA~1\AppData\Local\Temp\
    [main] [ 2012-05-16 14:26:55.881 EDT ] [Utils.getLocalHost:356] Hostname retrieved: RC_X220, returned: RC_X220
    [main] [ 2012-05-16 14:26:55.881 EDT ] [WindowsSystem.startRemoteExecServer:1728] _WS_: Checking if service is started

    [main] [ 2012-05-16 14:26:55.881 EDT ] [Utils.getLocalHost:356] Hostname retrieved: RC_X220, returned: RC_X220
    [main] [ 2012-05-16 14:26:55.881 EDT ] [WindowsSystem.dorunRemoteExecCmd:2061] _WS_: Calling windowsNative with cmd: c:\Oracle\E1Local\bin\getcrshome.exe
    [main] [ 2012-05-16 14:26:56.895 EDT ] [WindowsSystem.dorunRemoteExecCmd:2064] _WS_: WinNative returned: true
    [main] [ 2012-05-16 14:26:56.895 EDT ] [WindowsSystem.dorunRemoteExecCmd:2078] _WS_: remote command executed, but didn’t return zero.
    [main] [ 2012-05-16 14:26:56.895 EDT ] [GETCRSHOMEUtil.getCRS_HOME:147] cmdTool.execute() failed.
    [main] [ 2012-05-16 14:26:56.895 EDT ] [HAUtils.isHASConfigured:364] Ignoring exception in isHASConfigured: PRCT-1400 : getcrshome execution failed. Detailed error:
    localnode
    PRCT-1400 : getcrshome execution failed. Detailed error:
    localnode
    at oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:425)
    at oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:592)
    at oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:652)
    at oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:360)
    at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:3413)
    at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:119)
    at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
    Caused by: PRCT-1400 : getcrshome execution failed. Detailed error:
    localnode
    at oracle.cluster.cmdtools.GETCRSHOMEUtil.getCRS_HOME(GETCRSHOMEUtil.java:161)
    at oracle.cluster.cmdtools.GETCRSHOMEUtil.getCRS_HOME(GETCRSHOMEUtil.java:112)
    at oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:422)
    … 6 more
    [main] [ 2012-05-16 14:26:56.895 EDT ] [Verifier.processRawConfigFile:4031] StorageType == 0
    [main] [ 2012-05-16 14:26:56.895 EDT ] [SilentHost.performOperation:532] processRawConfigFile=false
    [main] [ 2012-05-16 14:26:56.895 EDT ] [Verifier.validateTemplate:2019] StorageType == 0
    [main] [ 2012-05-16 14:26:56.895 EDT ] [SilentHost.performOperation:547] validateTemplate=true
    [main] [ 2012-05-16 14:26:56.911 EDT ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
    [main] [ 2012-05-16 14:26:56.911 EDT ] [MemoryCalculator.:95] setting memory minimums for 64 bit
    [main] [ 2012-05-16 14:26:56.911 EDT ] [Verifier.validateTemplate:2019] StorageType == 0
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.973 EDT ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.989 EDT ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=C:\Oracle\
    [main] [ 2012-05-16 14:26:56.989 EDT ] [Verifier.getControlfFileSizes:3510] No. of Control files:=1
    [main] [ 2012-05-16 14:26:56.989 EDT ] [Host.executeSteps:5039] Executing steps….
    [main] [ 2012-05-16 14:26:56.989 EDT ] [Host.setUpForOperation:3625] setUpForOperation: Mode = 128
    [main] [ 2012-05-16 14:26:56.989 EDT ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:56.989 EDT ] [OsUtilsBase.getBaseFromOrabase:611] cmds: c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:57.020 EDT ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
    c:\Oracle
    [main] [ 2012-05-16 14:26:57.020 EDT ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= c:\Oracle
    [main] [ 2012-05-16 14:26:57.020 EDT ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:57.020 EDT ] [OsUtilsBase.getBaseFromOrabase:611] cmds: c:\Oracle\E1Local\bin\orabase.exe
    [main] [ 2012-05-16 14:26:57.051 EDT ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
    c:\Oracle
    [main] [ 2012-05-16 14:26:57.051 EDT ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= c:\Oracle
    [main] [ 2012-05-16 14:26:57.051 EDT ] [OsUtilsBase.copyFile:1499] OsUtilsBase.copyFile:
    [main] [ 2012-05-16 14:26:57.051 EDT ] [OsUtilsBase.copyFile:1547] **write of file at destination complete…
    [main] [ 2012-05-16 14:26:57.051 EDT ] [OsUtilsBase.copyFile:1582] **file copy status:= true

    This has been identified as an issue with 11gR2 and a suggestion was to set:
    SQLNET.AUTHENTICATION_SERVICES = (NONE).

    I’m not clear that this solved the problem. I also don’t know where this setting is created. I hoping someone has a suggestion or resolution for this problem.
    Thanks,
    Ross

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. vpl

      Hi Ross,
      I have the same error in c:\Oracle\cfgtoollogs\dbca\E1Local\trace.log, but standalone works.

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Ross

    Thanks – that is both good and bad news. So this is not the real problem but I need to continue trying to diagnose the root cause of this. Just out of interest – i’m trying to install JDE Standalone 9.1 on a Lenovo Thinkpad X220.

    I hope someone can say yes to that question so that I can eliminate the Lenovo ThinkVantage tools as a possible cause of my issue.
    Thanks again

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Ahmad

    Thanks for your guide,

    it was successful from A-Z … only some changes because of the changes of the packages names in eDelivery portals .. but managed 🙂

    Thanks

    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
  • vpl

    Here is a video with installing of JDE 9.1 from JDEFusion.com

    VA:F [1.9.22_1171]
    Rating: +1 (from 1 vote)
    1. Marcelo Santos

      Great VPL!

      I’m out of time, but the second step would be to make a video and post here. Just for curiosity: Is there any change that we must made on the guide or the steps are correct?

      Thanks for video.

      Marcelo.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. vpl

        Hi Marcelo,
        Your guide is correct.

        Best Regards,
        Pavel

        VA:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
  • Arik

    Hi Marcelo,

    Thanks for the guide. I’ve tried to install the standalone but have run into an insurmountable error in the last steps. When trying to run the last install piece, I cannot get past step 21. I receive an error that the Oracle database E1Local is installed, but there is a problem with it. I’m told to check services (OracleE1LocalTNSListener and OracleServiceE1Local), stop and restart them. I’ve tried all of the remedial suggestions, including deleting everything and reinstalling, but after 4 attempts, it’s not working. Each time it stalls at the same place. Can you provide any help?

    Arik

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Ross

    I encountered exactly the same issue. I’ve atempted numrous variations o the implemenation with no sucess. However, in reveiwing the E1 9.1 Standalone Installatin Guide (E22499-02) and the Oracle Database Client Installation Guide 11g R2 (E10844-01) I found that both specify that the “tnsnames.ora” file must be created to allow access by both the 64 and 32 bit clients.

    Unfortunately, although I have reviewed examples of the setup of the tnsnames .ora file I’m not clear what the file should look like for the 11gR2 database client.

    Marcello can you copy your tnsnames file from your E1 9.1 setup so I can use that as a guide for setting up my tnsnames.ora file. I have a feeling that will define how the clinet connects to the database and allow completion of step 21.

    If you think that is not the issue, please advise.

    regards,
    Ross

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Marcelo Santos

      Hello Ross and Arik,

      Have both of you followed the step 26:

      “Copy the file tnsnames.ora from C:\Oracle\E1Local\NETWORK\ADMIN to C:\app\Admin\product\11.2.0\client_1\network\admin (since this file was not there/no need to setup the listener, just copy).” ?

      I’m away from my office and with no access to Virtual Machine that resides the demo install and .ora file, and to be honest, I never looked at that file during or after install process, I just copy it to the place indicated in the guide.

      Sorry Ross, but I cannot tell you if this is or not the issue, sorry.

      Marcelo.

      VN:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Arik

    Hello Marcelo,

    I did the steps you suggested but it still didn’t work. In addition, I restarted all the services the guide mentioned but that didn’t help either. If you have any other suggestions, I’d much appreciate it.

    Thanks
    Arik

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. vpl

      Hi Arik,
      I think that you’ll need to complete deistalling the Standalone Client or the OEE Database more deeply. Follow step 8, appendix A and B from this guide http://docs.oracle.com/cd/E24902_01/doc.91/e22499.pdf
      Good luck,
      Pavel.

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
  • Ross

    I think that’s worth a try. However, I have the same problem as Arik and I have run the full de-install of the OEE DB and 11gR2 at least three times. I’m still getting stuck at step 21 of Marcelo’s document (i.e. installing the JDE client fails with the same error as Arik described).

    Since this process has been successful for some of those who have used Marcelo’s guide, I’m wondering if it’s possibly an issue with other software installed on the PC on which I’m trying to load E1 9.1. My PC is a new Lenovo Thinkpad X220 with Win 7. I’m curious to know what type of PC Arik is using and if anyone has successfully installed on a similar Thinkpad?

    If anyone has any other suggestions – I’m willing to try them and I’ll keep you posted on the results.
    Cheers,
    Ross

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Arik

    Hi Ross,

    I’m actually installing this on a new MacBook Pro running Parallels Desktop 7 Virtual Machine >Windows 7 Professional SP1.

    Still no luck even after that very painful uninstall as recommended by VPL. Did you try the more exhaustive uninstall recommended by VPL?

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Marcelo Santos

    Hi Friends! Sorry for the delay. Only today I reached my desktop computer. Here are the contents of tnsnames.ora that is found in the C:\Oracle\E1Local\NETWORK\ADMIN:

    # Please edit this file to add the necessary oracle database
    # E1LOCAL is required (Local Oracle Database)
    # DO NOT DELETE E1LOCAL entry

    E1LOCAL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = E1Local)
    )
    )

    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    )
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    )
    )

    Hope this can help the guys that are facing install problems.

    Marcelo.

    VN:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
    1. Dmitry

      Hi, Marcello, try to run virtual machine. but password “Admin” doesn’t work.. Can you help please?

      VA:F [1.9.22_1171]
      Rating: 0 (from 0 votes)
      1. Marcelo Santos

        Dmitry,

        I’m not sure about the user that you are talking to, but, let’s see:

        1. In the Virtual Machine Article published here (http://www.jdesource.com/enterpriseone/jd-edwards-enterpriseone-9-1-demo-virtual-machine/) the Windows username is Admin, with password ‘password’ (without quotes).

        2. The JDE user and password is ‘DEMO’ (without quotes).

        I hope this can help you.

        Regards,

        Marcelo.

        VN:F [1.9.22_1171]
        Rating: 0 (from 0 votes)
  • Arik

    Hi Marcelo,

    Thanks for the update. Unfortunately it didn’t work for me. Perhaps Ross might have better luck. At this point, I’m not sure what else to try.

    I appreciate all of your suggestions.

    Arik

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Ross Cation

    Hello:

    I’ve tried the de-install and re-install of everything and edited the tnsnames.ora in both the 32 and 64 bit folders using the sample provided in the E1 9.1 download (which matches the format Marcelo provided above).

    I have checked OOE database error logs – but can’t identify any critical errors. However, when attempting the Client install the OUI provides an option to review “Installed Products”. Having done that – it shows only the 11g as being installed?? Is that we would should expect to see based on the Path setting where 32 bit Oracle DB is placed before the 64 bit??

    I’nm stuck but would appreciate hearing your thoughts on this question.
    Thanks for you time and help with all of this:)
    Ross

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • Poonam

    Hi Ross,

    The 32 bit client path should come before the E1Local path in environment variables and also you should be able to see both 32 bit and 64 bit Oracle DB path in the OUI when you check the Installed products.
    Check teh registry for Hkey_Local_machine\software\Wow6432Node\Oracle…does it have entries for all the E1Local and OraClient11G ?

    VA:F [1.9.22_1171]
    Rating: 0 (from 0 votes)
  • 1 2 3 4

    1. JD Edwards EnterpriseOne 9.1 Standalone Released | Deepesh M Divakaran

      […] Marcelo Santos has written up the summarized steps (for those who fret over reading Oracle docs) for JD Edwards Standalone 9.1 Installation here […]

    2. JD Edwards EnterpriseOne 9.1 Standalone Released | JDE Source

      […] Marcelo Santos: VPL, I tested the option that you told, and selecting onl […]

    3. JD Edwards EnterpriseOne 9.0 Standalone Demo (Oracle version) | JDE Source

      […] Marcelo Santos: VPL, I tested the option that you told, and selecting onl […]

    4. JD Edwards EnterpriseOne 9.0 Standalone Demo (Oracle version) | Deepesh M Divakaran

      […] Marcelo Santos has written up the summarized steps (for those who fret over reading Oracle docs) for JD Edwards Standalone 9.1 Installation here […]

    Leave a Reply